产品中心您的位置:网站首页 > 产品中心 > 专用仪器仪表 > 其他 > MHY-26314自动压样机/

自动压样机/

更新时间:2016-07-27

访问量:652

厂商性质:生产厂家

生产地址:北京美华仪科技有限公司

简要描述:
我公司的压样机是X射线荧光光谱仪的配套设备。HAD-400KN,MHY-26314型压样机采用内模压样方式,操作方便、效率、性能稳定可靠。
自动压样机/结构点 Characteristics of the Products
品牌其他品牌

   1.      自动压样机/  型号:MHY-26314

我公司的压样机是X射线荧光光谱仪的配套设备。HAD-400KN,MHY-26314型压样机采用内模压样方式,操作方便、效率、性能稳定可靠。 
自动压样机/结构点 Characteristics of the Products

●内模式压样,压头行程100毫米。可用于硼酸、钢环、铝杯、塑环等各类压样方式,适用范围广,作稳定。 Adopted internal mould sample-press, pressure head travel is 100 mm. The products can be used for various kinds of sample-pressing methods such as boric acid, steel ring, aluminum cup, plastic ring etc., with characteristics of broad scope of application and stable working.
●有的缓加压、慢退模程序更有利于保证压样合格率、提压样样量。 With specific programs of slow pressurization and slow mould-release, the products are favorable to ensure acceptance rate of sample-press, improve sample quality of sample-press.
●别的集成液压管道模块不仅使组装更加方便,而且减少了漏油机会。 With integrated hydraulic pipe block being specially designed, it not only makes assembling easier, but also reduces the chance of oil leak.
●加厚的油箱盖板使油泵和电磁阀的动作噪音更小。 With thickening oil-tank cover-board, it makes acting noise of oil pump and solenoid valve smaller.
●采用由可控硅集成的固态模块替代传统的接触器避免了由于电机频繁启动而引起的各类故障,有效提了该分的使用寿命。 Adopted solid-state block of integrated silicon controlled to replace traditional contactor, it avoids various kinds of troubles caused by frequent starting of motor and efficiently increases service life of this section.
●继电器控制分采用印刷板焊接结构,减少了控制箱的接线,提了电器控制的可靠性。 The Control section of relay is adopted the welding structure of printed circuit board, it reduces wiring of control box, improves reliability of electric control.
●控制电源采用低压24V,作更加安可靠。 Control power source is fully adopted low-voltage of 24V, which makes work safer and more reliable.
●结构紧凑,占地面积小。 With compacting structure, small floor space

参数
zui大压片压力60tf  (吨)
模具  硼酸、钢环、铝杯和塑料环
压头zui大行程100mm
压片保压时间0~999 秒
供电电源380V
额定率1.3kw
外型尺寸1180x720x530mm
净重420Kg

 

2.         旋涡混合器         型号: MHY-13309

简介:
    MHY-13309旋涡混合器系仿外,新外观,线条畅,铝合金外壳,橡胶头振动,连续、点动选。
旋涡混合器广泛应用于基因程、生化分析、矿院及其他些需要对液—液、液—固、固—固(粉末)混合的实验。它能将您所需要的何液体、粉末以速旋涡状形式快速混合。混合速度是手振荡混合的几十倍,且混合均匀、*。些难溶药物及染料,如红霉素染色液甚易混匀。由于该混合器作时对被混合物行搅拌及添加磁性元件,所以,也避免了被混合物质受外界的污染及磁场的影响,是生物化学、普通化学实验室、院、矿化验等的常规设备。
参数:
电源:220V  50HZ 率:40W
转速:3000转/分
作方式:点动,连续
作台直径:¢55mm(橡胶)

 

3.             往复式水浴恒温振荡器(改型) 型号:MHY-13308
参数:
电源: 220V 50HZ率: 500W
容量: 100 ml×16  200 ml×9
¢16.5mm×240只弹簧架升降距离50mm
振荡幅度:30mm
转速: 40-300转/分 无可调,自动保持,数显
培养室温度: 从5℃ -90℃意选择(数显)
噪声: 50分贝,机前1米A声
外型尺寸: 640×410×360mm 

 

4.           台式冷冻恒温振荡器 型号:MHY-13306

(产品以实物为准)
参数:
电源:单相 220V 50HZ
整机率:300 W 加热器:250 W
zui大容量:6×1000 ml(可自由调换) 
转速:30 - 250转/分 无可调、自动保持(数显)
培养室温度:室温-60℃ 选(数显)
噪声:zui转速运转,机前1米处A声50分贝以下
灯光:内装有普通照明灯,可对箱内行光照处理
外型尺寸:800×570×500mm 

 

5.          冷冻恒温振荡器  型号:MHY-13305

参数:
电源: 220V 50HZ 率: 500W
zui大容量: 6×5000mL(可自由调换)
转速: 40-200 转/分 无可调,自动保持,数显
培养室温度: 从室温5℃-50℃意选择(室温<30℃时数显)
噪声: 50分贝,机前1米A声
体积: 1200×650×700mm 

 

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7